Caterpillar D5 LGP bulldozer
































If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts




















ENGINE - Knocking: No knocking
ENGINE - Air cleaners: New
ENGINE - Any smoke: Minimal to none
ENGINE - Oil or fuel leaks: None visible
ENGINE - General running condition: Runs well
TRANSMISSION - Gear change: Changes well
TRANSMISSION - Steering: Responsive steering
TRANSMISSION - Oil leaks: None visible
TRANSMISSION - Is the transmission noisy?: No noise
TRANSMISSION - Torque converter: No noise or juddering
TRANSMISSION - Controls: Good tight controls
TRANSMISSION - General running condition: Moves well
UNDERCARRIAGE - Shoe height: 55mm 90%
UNDERCARRIAGE - Shoes - any wear in trailing edge: Minimal
UNDERCARRIAGE - Rail height: 117mm 80%
UNDERCARRIAGE - Any signs of link failure?: No
UNDERCARRIAGE - Average diameter of pins and bushings: 64mm 80%
UNDERCARRIAGE - Have pins been turned on chains: No
UNDERCARRIAGE - Sprockets: 75mm gape, 18mm tips. 80%
IDLERS - UNDERCARRIAGE - Left side front idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Left side rear idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Right side rear idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Right side front idler: 5mm x 25mm, 90%
TOP ROLLERS - UNDERCARRIAGE - Left side top roller: 181mm x 182mm, 100%
TOP ROLLERS - UNDERCARRIAGE - Right side top roller: 164mm x 165mm, 85%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 1: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 2: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 3: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 4: Visual only, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 5: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 6: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 7: 195mm x 196mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 8: 196mm x 196mm, 95%
CAB - Cab mounts - any wear?: No wear
CAB - Any wiring for laser system: Yes
CAB - Back up alarm: Loud and clear
CAB - Battery isolator switch: Manual
CAB - Lights: All lights working
CAB - Wipers: All working
CAB - Heater: Good heat
CAB - A/C: Nice and cold
CAB - Seat condition: Good condition
CAB - Cladding condition: Dusty
CAB - Floor mat condition: Dusty, no wear or tears
CAB - Seat belt: Working as should
CAB - Mirrors: Rear view only
CAB - Horn: Loud and clear
CAB - Cab mounts: Good mounts
CAB - Cab glass condition: Good condition
CAB - Cab glass have any cracks: No damage
CAB - Any perspex fitted: None fitted
BLADE - Blade type: PAT
BLADE - Blade width: 4020mm
BLADE - Blade height: 1260mm
BLADE - Pitch ram wear: L/H: 1mm x 1mm, R/H: 1mm x 2mm
BLADE - Lift ram wear: L/H: 1mm x 2mm, R/H: 1mm x 1mm
BLADE - Tilt ram wear: 1mm x 0mm
BLADE - Ball wear: 5mm
BLADE - Link ram wear: 2mm x 2mm
BLADE - C Frame wear: L/H: 3-4mm x 3-4mm
BLADE - Equaliser bar wear: 4mm x 4mm x 4mm
BLADE - Face / Moldboard: Good condition
BLADE - Cutting edge condition: 40mm left
BLADE - Have cutting edges been turned: No
BLADE - General blade condition: Decent shape all around
PAINT & DECALS - Paint condition: Good
PAINT & DECALS - Condition of decals: To be replaced