New XCMG XCMG XC8‑C2570 Backhoe Loader
Xuzhou
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 185 568...
+86 185 5689 4445
5,512 lb
Digging depth
13.94 ft
China, Xuzhou
5,512 lb
Digging depth
13.55 ft
China, Xuzhou
13.88 ft
China, Hefei
5,512 lb
China, Hefei
15,430 lb
China, Hefei City, Anhui Province
5,512 lb
Digging depth
14.76 ft
China, Shanghai
16,760 lb
Digging depth
14.5 ft
China, Xuzhou
5,512 lb
Digging depth
14.17 ft
China, Xuzhou
China, 济宁市
4,409 lb
China
13,230 lb
Digging depth
8.2 ft
China, Shanghai
China, Shanghai
China
22.64 ft
China, Shanghai
China, Hanghzou, Zhejiang
24,250 lb
Digging depth
14.3 ft
China, Shanghai
8,378 lb
Digging depth
15.22 ft
China
4,409 lb
China, Shanghai
Backhoe loader parts
This backhoe‑loader is powered by BF4M2012‑10T3R four‑cylinder, turbo‑charged, water‑cooled, four‑stroke direct‑injection diesel engine. The engine delivers a rated net power output of 74 kilowatts at 2200 revolutions per minute, with total displacement of 4.04 litres (4040 cc), complying with China Non‑road Stage‑III emission standard which is equivalent to EPA Tier 3 requirement.
For the power transmission system, this unit adopts XCMG MYF110 power‑shift gearbox, with 4 forward gears and 3 reverse gears. Heavy‑duty wet‑brake front and rear drive axles are installed. Its maximum travel speed reaches up to 38 km/h, maximum gradeability is 20 degrees, and the minimum turning radius measures 4400 mm, while the wheelbase is 2180 mm. Front tyre specification is 12.5/80‑18, and rear tyre size is 19.5L‑24. The maximum tractive force is no less than 70 kN.
On the front loader section, the machine is fitted with a standard 1.0 cubic‑meter general‑purpose loader bucket. Its maximum dumping height is 2776 mm, maximum dumping reach is 831 mm, and the maximum bucket‑pin height reaches 3495 mm. The maximum loader breakout force is 66 kN. The front loader boom supports automatic levelling function to improve working efficiency.
At the rear backhoe excavation end, the machine comes with a standard digging bucket of 0.3 cubic‑meter capacity. Its maximum digging depth is 4440 mm, maximum horizontal digging radius is 5426 mm, and the bucket breakout force reaches 63 kN. The backhoe boom can swing at a total angle of 180 degrees for wide excavation coverage. Operators are allowed to switch freely between ISO and SAE control patterns to meet different operation habits.
The hydraulic system works under a rated working pressure of 24 MPa, adopting dual‑pump confluence hydraulic circuit for high‑efficiency operation. Mechanical control is equipped for the back‑end working device. Hydraulic quick‑coupler connections are optional for both loader and backhoe ends, so various attachments can be installed rapidly. Optional working attachments include six‑in‑one multi‑function bucket, pallet fork, grapple, breaker hammer, auger drill, sweeper, soil ripper, vibrating compactor plate and other tools.
The overall outer dimension of the whole machine with standard front bucket is 7340 mm in length, 2350 mm in width and 3437 mm in height. The fuel tank volume is 166 litres and the hydraulic oil tank capacity is 95 litres.