The phone numbers have been checked New Stationary Batch Asphalt Plant LB1500 120t/h
Zhengzhou
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 150 389...
Show
+86 150 3895 2113
China, Zhengzhou
China, Zhengzhou
China, Zhengzhou
LB1500 Stationary Asphalt Mixing Plant
I. Main Technical Parameters
● Capacity: 120 T/H
● Fuel Consumption: 7 L/T
● Aggregate Weighing Precision: ±0.5%
● Powder Weighing Precision: ±0.5%
● Asphalt Weighing Precision: ±0.25%
● Hot Asphalt Temperature: 130℃-165℃ (adjustable)
● Efficiency of Dust Catcher: Dust content in emission ≤50 mg/Nm³
● Working Noise: ≤70 db(A)
● Operation: PLC plus touch screen
● Installation Power: 260 kw
● Installed Area: 35×31×15 m
● Power supply: 380V, 50HZ, 3-phase (adjustable)
● Documents: Lay-Out/ Electric Circuit Diagram; Operation Manual; Qualification Certificate
II. Detailed Configuration
● Cold Aggregates Feeding System
- Cold Aggregate Bin: Hopper volume 4×6.5 m³; loading Height 3.0 m; Width of hopper 3.2 m; Motor power 4×1.5kw; Belt width 500 mm; Vibration motor power 2×0.25 kw
- Aggregate Feeding belt: belt width 500 mm; Motor power 4×1.5kw
- Aggregate collecting belt: Motor power 1×4kw
- Tilted Belt Feeding Conveyor and middle screen: Belt width 500 mm; Power 4 kw; Middle screen 1 set
● Drying & Burning System
- Dry Drum: Diameter φ1.8 m; Length 8 m; Motor power 4×11 kw; Rotating speed 9 r/min
- Automatic Light Oil Burner: Oil consumption 7 L/T; Fan power 15 kw; Gars pump power 3 kw; Temperature sensor 1 set; - Adjustment rate 1:3
● Hot Aggregate & Powder Lifting System
- Hot Aggregate Lifting System: Motor power 11 kw; Bucket elevator type Plate chain
- Powder Lifting System: Motor power 4 kw; Bucket elevator type Plate chain
● Screening System
- Vibrating Screen With 4 Layers: Mesh size 5×5; 12×12; 19×19; 27×27; Driving motor power 11 kw
● Weighing System
- Hot Aggregate Weighing System: Hot aggregate weighing bin volume 1300 kg; weighing sensors 3 pcs
- Powder Weighing System: Powder weighing bin volume 150 kg; Vibration motor power 0.12 kw; weighing sensors 3 pcs
- Asphalt Weighing & Spraying System: Asphalt weighing bin volume 70 kg; Spraying pump power 7.5 kw; Weighing sensors 3 pcs
● Mixing System
- Twin-shaft Mixer: Mixing capacity 1500 kg/ batch; Mixing time ≤18 s; Motor power 2×22 kw; Hot aggregate bin 4 pcs
● Dust Removal System
- Primary Volute Casing Collector: Motor power 4 kw
- Bag Dust Collector: Filtering area 450 m²; Dust content in emission ≤ 50 mg/Nm³; Bottom screw conveyor power 3 kw; - - Screw conveyor for filler recycling 2×4 kw
- Induced Draft Fan: Motor power 75 kw
● Pneumatic System
- Air Compressor: Capacity 3 m³/min; Power 18.5 kw
- Air Filter: Air proceeding capacity 3 m³/min
- Pneumatic Component: One set of air cylinder, valve and air pipes
● Electronic Control System
- Full-automatic Electronic Control System (Russian & Chinese): 1 set
- Strong current cabinet 1 pc;
- Weak current cabinet 1 pc;
- Control room 1 pc;
- Control panel 1 pc;
- PLC 1 pc;
- Touch screen 1 pc;
- Air conditioner 1 pc
- Tool box 1 pc
III. Technical Specification
● Design Conditions & Considerations
- Environmental temperature is 20℃ with standard atmospheric pressure; altitude ≤2000 m
- Average moisture content of cold aggregate <5%
- Hot aggregate temperature <160 ℃
- Finished materials is medium-grained, the stone volume-weight ≥1600 kg/m³
- Sand content <35%
- The ratio of aggregate shall meet the national standard; Dust content of cold aggregate ≤3%
- Cold aggregate should be clean enough without too much dirt or other material; Cold aggregate gradation should be continuous
- Cold aggregate shall not contain large amounts of oversized material, otherwise it will cause blocking, resulting in reduced ability to supply aggregate
- Moisture content of powder must be less than 0.5%, and there should be no lumping or arching, otherwise it will cause supplying interruption or lag, which can affect the productivity
- The asphalt should have good coating performance; Within the standard mixing time, the aggregates should be completely and evenly coated with asphalt, and the asphalt temperature should be controlled within 150℃±5℃ (ordinary asphalt)
● Specific Requirements for Fuel
- Heat Value: ≥ 9600 kcal/kg
- 50℃ Kinematic Viscosity: ≤ 180cst
- Mechanical Impurity Content: ≤ 0.3%
- Moisture Content: ≤ 3%