New Heli G2-S 2,5 ton Li-ion electric forklift with 4,7 meter lift
Csengele
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+36 70 657...
Show
+36 70 657 3470
Hungary 
10.83 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
10.83 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
15.42 ft
Hungary, Csengele
Hungary, Csengele
G2-S, Li-ion electric, 2.500 kg load capacity, four-wheel forklift, triplex mast, 4,7 m lift, enclosed cab, hydraulic side shift and fork positioner, 15 km/h
Year: 2026
Engine hours: 2
Weight: 4480 kg
Max lifting height: 4,7 m
Max lifting weight: 2500 kg
// OTHERS //
- Key features:
- - Series: G2-S
- - Type: CPD25-GC6LI-S
- - Operation mode: Electric LI-ION (Lithium battery)
- - Drive motor: 15 kW
- - Lift motor: 21 kW
- - Factory HELI controller
- - Load capacity: 2.500 kg (500 mm to load center)
- - Own weight: 4.480 kg (measured on certified weighbridge)
- - Lifting mast: Free-lift triplex (three-stage)
- - Lifting height: 4.700 mm (maximum fork height)
- - Structural height: 2.165 mm (closed mast height)
- - Free Lift: 1.165 mm (structural height does not change)
- - Overhead guard height: 2.170 mm
- - Forks: 40 mm x 122 mm x 1.220 mm (thickness/width/length)
- - Mast tilt: 6°/6° (forward/backward)
- - Ground clearance: 130 mm
- - Under mast clearance: 115 mm
- - Turning radius: 2.070 mm
- - Travel switch: Forward and reverse electrically selectable with a stalk switch on the steering column
- - Number of gears: Three travel modes selectable: P(ower), E(conomy), S(low)
- - Wheel arrangement: Four-point support
- - Maximum travel speed: 15 km/h
- - Steering: Electric
- - Steered axle: Rear
- - Brake system: Hydraulic service brake
- - Parking brake: Mechanical, lever-operated (easy leverage)
- - Tires: Non-marking superelastic solid tires
- - Hydraulics: 4/4 control valves, lever control
- Battery:
- - Lithium-ion 80 V / 202 Ah
- - 35 A built-in fast charger
- Extras (included in the sale price):
- - Fully enclosed cab with heating
- - Two-speed adjustable fan
- - Attached hydraulic fork carriage side shifter with fork positioner
- - Wide-angle rearview mirror
- - Folding rearview mirror on both sides
- - 2 LED front work lights, 1 LED rear work light
- - LED rear lighting (brake light, reverse light)
- - Yellow LED rear work light
- - Horn on the rear handle (comfortable reversing)
- - Reverse warning sound
- - USB port (5 V / 1 A)
- - Cup holder
- - OPS driver seat (weight adjustable, suspended)
- - Color LCD display: Informative, mode, speed, battery charge, charge reminder, operating hours
- Accessories, documents:
- - Toolbox with tools and fuses
- - 16A 230V AC power charging cable (for built-in fast charger)
- - Declaration of Conformity (DoC)
- 380 V / 200 A fast charger and additional extras are available for a surcharge
Should you have any questions, please don't hesitate to contact us.
Phone: please see contact details
We also offer Europe-wide shipping.
Agropark: 41325