Ferag FERAG line wire stitching machine
Pullach
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Germany, Wentorf (Hamburg)
Germany, Wentorf (Hamburg)
Germany, Wentorf (Hamburg)
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Germany, Rösrath
Germany, Emskirchen-Pirkach
Germany, Dabergotz
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Germany, Emskirchen-Pirkach
Netherlands, 2105 Heemstede
Netherlands, 2105 Heemstede
Belgium, Strombeek-Bever
Netherlands, 2105 Heemstede
FERAG wire stitching machine
Binding block format V1
Gross: min 152 × 217 – max315 × 340
Net: min 148 × 210 – max 300 × 332
Insert for feeder station
Min 110 × 95 – max 315 × 340
Gluing of sheets only – no blocks
Net format
min 55 × 85 – max 280 × 200
min 85 × 55
Advertising sleeves and folded inserts with one fold must be tested
Number of insert feeders 8
Number of glued-sheet feeders 1
Maximum block thickness 5 mm
Insert pre-fold
8 to 12 mm – back pre-fold only
Insert without pre-fold
Possible
but not across the entire format range
Double production
Cutting in the machine not allowed
Trimming
Head and foot trimming 3.5 – 50 mm
Side trimming 3.5 – 50 mm
Landscape format cannot be trimmed on the three-knife trimmer
which differs structurally from saddle stitchers and wire stitchers
Staples
Number of standard stitching staples
2 or 3
Staple size 15 mm
Distance between the two outermost staples 160 mm (measured from staple centers)
Distance from outer staple to center
80 mm (measured from staple centers)
Staples are fixed in position and individual ones can be deactivated
however
the product can be shifted relative to the staples
With two staples
For A4 format: the top and bottom staples are used
the middle one is deactivated
For A5 format: the top and middle staples are used
the bottom one is deactivated
Hanging eyes Not possible
Cover
The cover must be folded before saddle stitching. It is fed from the insert feeder. Optionally use Unicover
Paper weight for A4 cover
80 – 300 g/m² for wood-free and coated papers
max. 255 g/m² for folding boxboard
A4 cover weight min. 10 g
A cover with an outward flap is not possible – it can only be processed with the flap inward
then manually turned upward afterwards
Half-cover
Loaded from the insert feeder and must be folded before saddle stitching
Paper weight 130 – 200 g/m²
Minimum half-cover width for A4 format 110 mm
Inserts
Minimum insert weight: 10 g
24-page A4 insert (Lithoman 3) has priority over a 16-page + 8-page combination
12-page A4 insert (Lithoman 3) has priority over an 8-page + 4-page combination
Inserts of approximately equal weight have priority over inserts with very different weights
All 16-page inserts have priority over all 8-page inserts
Find more here
show contacts
Contact us at
show contacts