LOEW W 490 X 1.5 metal lathe
Eislingen6971 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Bühl-Weitenung
Germany, Eislingen
Germany, Eislingen
Germany, Karlsbad
Germany, Bühl-Weitenung
Germany, Karlsbad
Germany, Karlsbad
Germany, Hennigsdorf
Germany, Karlsbad
Germany, Location:bonn
Germany, Cologne
turning diameter over slide rest:260 mm
centre height:260 mm
turning length:1800 mm
turning speeds:11 - 2240 U/min
spindle passage:65 mm
thread - mm pitch:0,05 - 112 mm
thread - inch:1/4 - 56 inch.
turning speeds steps:24
total power requirement:11 kW
weight of the machine ca.:3,5 t
dimensions of the machine ca.:3,20 x 1,35 x 1,80 m
universal lathe with large spindle aperture, Multifix D tool holder, long. & lat. feed with fast speed controlled by joystick, spindle load display in front control panel, emergency cut-off, analogue load display, spindle brake, chip protection panel
Drehdurchmesser über Support: 260 mm
Spitzenhöhe: 260 mm
Drehlänge: 1800 mm
Drehzahl: 11 - 2240 U/min
Spindeldurchlass: 65 mm
Gewinde - mm Steigung: 0,05 - 112 mm
Gewinde - Zoll: 1/4 - 56 inch.
Drehzahlstufen: 24
Gesamtleistungsbedarf: 11 kW
Maschinengewicht ca.: 3,5 t
Raumbedarf ca.: 3,20 x 1,35 x 1,80 m
mit großem Spindeldurchlass; Multifix D Stahlhalter, Längs- und Quervorschübe mit Eilgang steuerbar über Joystick, Spindelbelastungsanzeige im Frontbedientableau, Sicherheits Not-Aus, Kühlmitteleinrichtung, analoge Belastungsanzeige, Spindelbremse, Spänespritzschutzwand
Maschinen Art: Leit- und Zugspindeldrehmaschine
Beschreibung English: turning diameter over bed:520 mm
turning diameter over slide rest:260 mm
centre height:260 mm
turning length:1800 mm
turning speeds:11 - 2240 U/min
spindle passage:65 mm
thread - mm pitch:0,05 - 112 mm
thread - inch:1/4 - 56 inch.
turning speeds steps:24
total power requirement:11 kW
weight of the machine ca.:3,5 t
dimensions of the machine ca.:3,20 x 1,35 x 1,80 m
universal lathe with large spindle aperture, Multifix D tool holder, long. & lat. feed with fast speed controlled by joystick, spindle load display in front control panel, emergency cut-off, analogue load display, spindle brake, chip protection panel
Standort: Eislingen
Zustand: gebraucht
Drehdurchmesser über Bett: 520 mm
Drehdurchmesser über Support: 260 mm
Spitzenhöhe: 260 mm
Drehlänge: 1800 mm
Drehzahl: 11 - 2240 U/min
Spindeldurchlass: 65 mm
Gewinde - mm Steigung: 0,05 - 112 mm
Gewinde - Zoll: 1/4 - 56 inch
Drehzahlstufen: 24
Maschinengewicht ca: 3,5 t
Raumbedarf ca: 3,20 x 1,35 x 1,80 m
mit großem Spindeldurchlass
Multifix D Stahlhalter
Längs- und Quervorschübe mit Eilgang steuerbar über Joystick
Spindelbelastungsanzeige im Frontbedientableau
Sicherheits Not-Aus
Kühlmitteleinrichtung
analoge Belastungsanzeige
Spindelbremse
Spänespritzschutzwand