Samag MFZ 2-2 machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Type: Decagon
Number of storage locations: 100 (2x50)
Number of cassettes: 10
Cassette locations: 10
Cassette pitch: 90 mm
Max. cassette magazine speed: 8.3 min
Delay time from max. cassette magazine speed to standstill: 300 ms
Max. tool load mass: 280 kg
Max. tool weight/plastic collet: 6 kg
Max. tool weight/steel collet: 8 kg
Max. tool diameter with free adjacent locations: 160 mm
Rotation axis: 10x36
Time to change from nearest cassette (left/right): 1.5 s
Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s
Y-axis (vertical) working stroke: 500 mm
Y-axis (vertical) total stroke incl. tool change: 775 mm
Axis acceleration X/Y: 0.6 xg / 0.8 xg
Spindle unit: GMN high-frequency spindle HCS 220-16000/28
Spindle spacing: 450 mm
Sleeve diameter: 220 mm
Drive motor: 1FE1 083-4WN11-1BA2
Torque (S1): 65 Nm
Torque (S2): 74 Nm
Swivel time 180°: 4.5 s
Faceplate/counterbearing diameter: 500/345 mm
Drive/counterbearing speed (max.): 15/20 min
Mass moment of inertia: 140 kgm²
Permissible tilting moment: 8,000 Nm
Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm
Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN
Parting angle: 3
Speed (max.): 20 min
Permissible tangential torque drive/counterbearing: 5,000 Nm
Line voltage: 400 V
Control voltage: DC 24 V
Dimensions (L x W x H): 2885 x 1095 x 1830 mm
Discharge height: 1020 mm
Gap screen: 500 μm
Filling volume: 100 l
Wastewater pump: 380 l/min at 1.6 bar
Cooling capacity: 1900 W
Min./Max. ambient temperature: 10/40 °C
Max. water outlet temperature: 20 °C
Condensation temperature: 40 °C
Refrigerant: R134a, 2 kg
Connected electrical power: 5.1 kW
Clean water tank (empty): 930 kg
Chip conveyor (empty): 450 kg
Tool storage
Axes and travel paths
Travel paths
Main spindle drive
Workpiece carrier unit
W-axis swivel unit
Workpiece holder A1/A2 axis
Swivel time 180°: 3.5 s
Faceplate/counterbearing diameter: 345 mm
Mass moment of inertia: 20 kgm
Permissible tilting moment: 3,000 Nm
Additional equipment
Cooling lubricant system (scraper belt conveyor)
Central cooling unit
Type: DK 160-V/SO