IMA ADVANTAGE 310 edgebander
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Grenzach-Wyhlen
Germany, Hamburg
Germany, Hamburg
Germany, Hamburg
Germany, Bovenden
Germany, Munich
Germany, Regensburg
Germany, Langen
Germany, De-29562 Suhlendorf
Germany, Eschenburg
Germany, Calbe
Germany, Liebenwalde
Germany, Jestetten
Germany, Würselen
Germany, Rohrbach b. Landau
Germany, Hamburg
Germany, Kunde
Germany, Bovenden
Germany, Zittau
Machine Benefits
Technical Machine Benefits
Minimum workpiece length: 150 mm
Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm
Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf)
Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm
Machining allowance per workpiece edge: 0 - 5 mm
Workpiece shape: rectangular
Material: chipboard, mdf
Surface material: direct coating (melamine resin paper), paper, foil, veneer
Extra Information
Edging Material
Roll material without foil:
Paper edges & plastic edges: 0.3 - 3.0 mm
Veneer edges: 0.5 - 3.0 mm
Max. edge cross-section: 150 - 180 mm²
Cut-to-length edge strips:
Strips: 3.0 - 8.0 mm
Max. strip cross-section: 520 mm²
Edge height: Min. 12 mm, max. 65 mm
Max. upper edge overhang: 2 mm
Edge profiles:
Paper edge: Approx. 0.4 mm, bevel 15°
Plastic edge up to 3.0 mm, depending on radius tool
Milling strip flush up to 8 mm
Machine
Constant workpiece projection from the chain track: 35 mm + edge thickness
Max. cutting cross-section: 520 mm²
Passage width: Min. 65 mm (with 35 mm projection)
Min. workpiece length in feed direction: 150 mm
Basic height (top edge of chain track): 940 mm
Aggregate side: Left in feed direction
Pneumatic connection: Approx. 7 - 8 bar
Joining Unit 08.379 and Blow Nozzle
2 motors 4 kW each, 9000 rpm
Gluing Unit 283.1513
Glue dispenser 0.8 l, 60 mm high
Suitable for hot melt or PU glue
With single roller/strip magazine, roller diameter 800 mm
3 main pressure rollers and 3 pressure rollers
Cutting Unit 08.415
Pneumatically swivels to 0° or 8
2 motors, 12,000 rpm
2 HM cross-cut saw blades
Copy Trimming Unit SKF-L
4 motors, 12,000 rpm
Profile length in throughfeed direction: Max. approx. 50 mm
Workpiece thickness: Max. 60 mm
Working speed: Max. approx. 20 m/min
Distance between 2 workpieces: Min. approx. 400 mm
Profile Scraper Unit 08.519
For rescraping an upper and lower milled quarter circle profile
Self-Scanning Scraper Unit 08.521
For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces
Buffing Unit 08.617-2
Upper and lower motor: 180 W, 1400 rpm
2 polishing wheels 50 x 160 x 19 mm
application type: Edge Banding
Location: Germany
machine type: Edgebander