ABI TM22 + MRZV 30 VV drilling rig
Łódź7128 km to "United States/Ashburn"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 602 84...
Show
+48 602 848 832
+370 662 ...
Show
+370 662 39873
Poland 
6,217 lb
Lifting height
28.54 ft
Poland, Zgierz
220,500 lb
Lifting height
170.6 ft
Serbia, Zemun (Beograd)
176,400 lb
Lifting height
160.1 ft
Netherlands, Oosterhout
44,090 lb
Lifting height
82.02 ft
Poland, Warsaw
396,800 lb
Lifting height
154.2 ft
Netherlands, Oosterhout
104 ft
Greece, Eleftherio-Kordelio
661,400 lb
Lifting height
265.7 ft
China, Shanghai
1,653,000 lb
United Kingdom, Billingham
440,900 lb
Lifting height
262.5 ft
China, Shanghai
Motor hours – c.a. 14.000 mth
Production year – 2012
Unit weight without working equipment - 75,900 kg
Transport weight without counterweight - 60,500 kg
Assembly weight including basic arm and auxiliary winch - 21,500 kg
Max. torque take-up - 200 kNm
Max. useful load capacity at minimum reach - 15,000 kg
Dimensions
Max./Min. height - 13,893-27,080 mm
Max. height to quick-change device lock - 24,600 mm
Mast offset below ground level - 2,540 mm
Transport width - 3,400 mm
Transport length - 14,474 mm
Transport height - 3,650 mm
Pre-tensioning and pulling forces
Pre-tensioning force - mast cylinders - 150 kN
Pulling force - mast cylinders - 300 kN
Maximum mast tilt
Forward - +4 deg
Backward - -5 deg
Sideways - +/-4 deg
Mast slewing range +/-95 deg
Carrier vehicle
Hydraulic excavator with crawler chassis - SR35T-D T41/380-V
Engine CAT C18
MRZV 30VV Vibratory Hammer with SKZ 1800 Clamping Jaws
Centrifugal Force at Nominal RPM with Standard Clamping Jaws (SKZ.1800) - 1500 kN
Max. Static Pulling Force/Pre-Tension Force - 300 kN
Max. Piling Element Weight - 3200 kg
Clamping Force - 1800 kN
Available to take: end of 2025 year
Motor hours – 15.000 mth
Production year – 2012
Unit weight without working equipment - 75,900 kg
Transport weight without counterweight - 60,500 kg
Assembly weight including basic arm and auxiliary winch - 21,500 kg
Max. torque take-up - 200 kNm
Max. useful load capacity at minimum reach - 15,000 kg
Dimensions
Max./Min. height - 13,893-27,080 mm
Max. height to quick-change device lock - 24,600 mm
Mast offset below ground level - 2,540 mm
Transport width - 3,400 mm
Transport length - 14,474 mm
Transport height - 3,650 mm
Pre-tensioning and pulling forces
Pre-tensioning force - mast cylinders - 150 kN
Pulling force - mast cylinders - 300 kN
Maximum mast tilt
Forward - +4 deg
Backward - -5 deg
Sideways - +/-4 deg
Mast slewing range +/-95 deg
Carrier vehicle
Hydraulic excavator with crawler chassis - SR35T-D T41/380-V
Engine CAT C18
MRZV 30VV Vibratory Hammer with SKZ 1800 Clamping Jaws
Centrifugal Force at Nominal RPM with Standard Clamping Jaws (SKZ.1800) - 1500 kN
Max. Static Pulling Force/Pre-Tension Force - 300 kN
Max. Piling Element Weight - 3200 kg
Clamping Force - 1800 kN